Printer ribbon maintenance

Printer ribbon maintenance printer ribbon maintenance the correct operation of the printer can better maintain the printer ribbon. Master printer to do the right methodcan maintain and increase the lewd with ribbon ribbon life printer. Below we look at how to operate the printer can maintain the ribbon: we must learn to let the Nylon ribbon roll "forever" moist. After theSTAR printer ribbon  ink will work a long time if the gradualdepletion of ribbon, finally makes it impossible to normal prints the contents to the printer. For example, we can use two small bubble "immersion" ink, the ink ribbon is tightly clamped in the middle. We need skilled operation of paper thickness regulator,to ensure that the surface of the print head and printer paper is always in the rightdistance. Because under normal circumstances, if the printer is using a new ribbon we can adjust the thickness of the paper regulator to avoid the printed words effect is too strong. Finally can effectively guarantee the print quality. When we regulator in the regulation of the thickness of the paper, we need to ensure that the printing effect canmeet the needs in the premise of fully conform to big big principle. Learn to giveribbon "do surgery usually when using the printer". If the use of process encounteredprint ribbon box turning poor phenomenon will lead to the repeated use of the printerribbon of a region. We can put the cut the ribbon is considered a "loophole" and then use the tape to have cut the ribbon together to.