1, so that the printer ribbon"forever" to keep moist. Printer ribbon work after a long time on the ink ribbon, then will gradually depleted, finally making the printer can not print properly the content. For example, we can use the two small bubble "soak" ink, the ribbon tightly in the middle.
2, the operation of skilled paper thickness regulator, for this purpose to ensure that the print head and the surface of the printer paper is always in the right distance. Because under normal circumstances, if the printer using the new ribbon when we can adjust the paper thickness regulator to avoid too strong to print out the handwriting effect. Can effectively guarantee the quality of the final print. We adjust the paper thickness regulator, the need for us to ensure print quality to meet the needs of full compliance with the premise can be big on the big principles.
3, usually the time to learn to use the printer ribbons "surgery." If you use the process encountered poor print ribbon cassette rotation phenomenon, then it will cause the printer ribbon re-use an area. We can put the ribbon among the "loopholes" in the section has been cut off and then use tape to stick together to cut the ribbon.
4, to add the printer ribbon "energy." That is an ink printer Ribbon. Ribbon work long hours will make the ink on the surface of the printer or less is consumed, if not promptly replaced printout results will not be satisfactory. We got two small bubble size appropriate and absorbing enough of the printing ink, the little foam tightly clamped exposed ribbon area outside of the ink ribbon cassette and gently twist the ribbon shaft can be.
没有评论:
发表评论